Maxicode - Honeywell ORBIT 7120PLUS User Manual

Data Matrix Code Page
Data Matrix Code pages define the mapping of character codes to characters. If the
data received does not display with the proper characters, it may be because the
bar code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created (see
Character Replacements
from the
then appear properly.

MaxiCode

MaxiCode On/Off
Orbit 7120plus/7190g User Guide
on page 218), and scan the value and the
Programming Chart,
< Default All MaxiCode Settings >
On
beginning on page 225. The data characters should
Data Matrix Code Page
Off
ISO 2022/ISO 646
Save bar code
* Off
137