Interfunction Delay; Intermessage Delay - Honeywell ORBIT 7120PLUS User Manual

To remove this delay, scan the Delay Length bar code, and set the number of
delays to 0. Scan the
page 225.

Interfunction Delay

An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay bar code below, then scan the number of 5ms
delays, and the
225.
To remove this delay, scan the Interfunction Delay bar code, then set the number
of delays to 0. Scan the
page 225.

Intermessage Delay

An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay bar code
below, then scan the number of 5ms delays, and the
Programming Chart,
To remove this delay, scan the Intermessage Delay bar code, then set the number
of delays to 0. Scan the
page 225.
64
Save bar code from the
Save bar code from the
Prefix
STX 1 HT
Interfunction Delay
Save bar code from the
beginning on page 225.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
Save bar code from the
Programming Chart,
Programming Chart,
Scanned Data Suffix
2 3 4 5 CR LF
Interfunction Delays
Programming Chart,
Save
2nd Scan Transmission
Programming Chart,
Orbit 7120plus/7190g User Guide
beginning on
beginning on page
beginning on
bar code from the
beginning on