1. Turn off power and disconnect the keyboard cable from the back of the termi-
2. Connect the appropriate interface cable to the device and to the terminal/
Note: The power supply must be ordered separately, if needed.
3. Turn the terminal/computer power back on. The scanner beeps.
4. Verify the scanner operation by scanning a bar code from the
The unit defaults to an IBM PC AT and compatibles keyboard wedge interface with
a USA keyboard. A carriage return (CR) suffix is added to bar code data.
Orbit 7120plus/7190g User Guide
nal/computer.
computer.
on page 223. The scanner beeps once.
Sample Symbols
3