Honeywell ORBIT 7120PLUS User Manual page 108

Interleaved 2 of 5 Length Lock 1
Use a Length Lock code to set a specific length for Interleaved 2 of 5 bar codes.
Interleaved 2 of 5 codes that do not conform to this length are discarded. To set the
number for Length Lock 1, scan the bar code below and then scan the digits for the
length from the
this setting. Default = 0.
Note: This command can be used together with Length Lock 2 to set a range of allowable
lengths.
Interleaved 2 of 5 Length Lock 2
Use a Length Lock code to set a specific length for Interleaved 2 of 5 bar codes.
Interleaved 2 of 5 codes that do not conform to this length are discarded. To set the
number for Length Lock 2, scan the bar code below and then scan the digits for the
length from the
this setting. Default = 0.
Note: This command can be used together with Length Lock 1 to set a range of allowable
lengths.
Interleaved 2 of 5 Message Length
Scan the bar codes below to change the message length. Refer to
Description
lengths = 2-80. Minimum Default = 6, Maximum Default = 80.
Minimum Message Length
94
Programming Chart,
Programming Chart,
(page 86) for additional information. Minimum and Maximum
beginning on page 225. Scan
Length Lock 1
beginning on page 225. Scan
Length Lock 2
Orbit 7120plus/7190g User Guide
Save to save
Save to save
Message Length
Maximum Message Length