Honeywell ORBIT 7120PLUS User Manual page 139

Plessey Check Character
No Check Character indicates that the scanner reads and transmits bar code data
with or without a check character.
When Check Character is set to Validate, but Don't Transmit, the unit only reads
Plessey bar codes printed with a check character, but will not transmit the check
character with the scanned data.
When Check Character is set to Validate and Transmit, the scanner only reads
Plessey bar codes printed with a check character, and will transmit this character at
the end of the scanned data. Default = No Check Character.
Plessey A to X Conversion
When scanning Plessey bar codes, you can convert all "A" characters to "X." This
conversion applies to the data and the check characters. Default = A to X Conver-
sion Off.
Orbit 7120plus/7190g User Guide
* No Check Character
Validate and Transmit
* A to X Conversion Off
Validate, but Don't Transmit
A to X Conversion On
125