Upc-E0; Upc-E0 Addenda Required - Honeywell ORBIT 7120PLUS User Manual

UPC-E0

UPC-E0 On/Off
Most U.P.C. bar codes lead with the 0 number system. To read these codes, use the
UPC-E0 On selection. If you need to read codes that lead with the 1 number sys-
tem, use
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.

UPC-E0 Addenda Required

When Required is scanned, the scanner will only read UPC-E bar codes that have
addenda. Default = Not Required.
110
UPC-E1 (page 112). Default = On.
* UPC-E0 On
On
Required
<Default All UPC-E Settings>
Orbit 7120plus/7190g User Guide
UPC-E0 Off
* Off
* Not Required