Toro Multi Pro 5800-D Installation Instructions Manual page 38

Figure 84
1. Retainer
2. Quick-connect fitting
(left-boom-section valve)
3. Quick-connect fitting
(center-boom-section
valve)
4. Quick-connect fitting
(right-boom-section valve)
3. Secure the straight barbed fitting to the quick-connect
fitting with the retainer that is supplied with the hose
(Figure 84).
4. Repeat steps 2 and
right-boom-section valves and center and right
boom-supply hose.
5. Straight barbed
fitting—supply hose for the
left-boom section—2 x 205
cm (3/4 x 80-13/16 inches)
6. Straight barbed
fitting—supply hose for the
center-boom section—2
x 58 cm (3/4 x 22-13/16
inches)
7. Straight barbed
fitting—supply hose for
the right-boom section—2
x 170 cm (3/4 x 66-13/16
inches)
3 for the center and
Installing the Supply Hoses to the
Boom Sections
1. Assemble the center boom-supply hose onto the
T-fitting at the center-boom section
1. T-fitting
2. Hose clamp
2. Secure the hose to the T-fitting with a hose clamp that
you removed in
(page 20).
3. Route the right boom-supply hose through the support
clamp at the end of the center-boom section
86).
38
(Figure
Figure 85
3. Supply hose for the center
boom—2 x 58 cm (3/4 x
22-13/16 inches)
Removing the Boom-Section Hoses
85).
(Figure