Toro Multi Pro 5800-D Installation Instructions Manual page 16

Removing the Agitation Throttle Valve
1. At the top of the sprayer pump, remove the 2
flange-head bolt (5/16 x 3/4 inch) that secure the
agitation throttle valve to the throttle-valve bracket
(Figure 34).
Figure 34
1. Agitation throttle valve
2. Throttle-valve bracket
3. Flange-head bolt (5/16 x
3/4 inch)
2. Remove the 2 flange-head bolt (1/4 x 3/4 inch) that
secure the throttle-valve bracket to the sprayer-pump
bracket, and remove the bracket from the machine
(Figure 34).
Note: Retain the 2 flange-head bolt (1/4 x 3/4 inch)
for installation Assembling the Agitation Throttle Valve
(page 25). You no longer need the 2 flange-head bolt
(5/16 x 3/4 inch) and agitation throttle valve.
3. Remove the retainer that secures straight barbed fitting
of the agitation supply hose to the agitation valve
(Figure 35).
4. Sprayer-pump bracket
5. Flange-head bolt (1/4 x
3/4 inch)
1. Straight barbed fitting
2. Agitation valve
4. Remove the ball valve and agitation supply hose from
the machine (Figure
Note: You no longer need the ball valve and agitation
supply hose.
16
Figure 35
3. Retainer
35).