Toro Multi Pro 5800-D Installation Instructions Manual page 31

Figure 64
1. Shutoff-valve bracket
2. Front of the machine
6. Assemble the eductor shutoff valve to the filter head
(Figure 63) with a flange clamp—40 to 64 mm (1-9/16
to 2-1/2 inches).
7. Assemble the shutoff-valve bracket to the manifold
bracket (Figure 64) with the 2 flange locknuts that you
removed in step 3, and torque the nuts to 1978 to 2542
N∙m (175 to 225 in-lb).
3. Bolt (5/16 x 3-3/4 inches)
4. Flange locknuts (5/16
inch)
Moving the Pressure-Relief Valve
1. Remove the retainer that secures the pressure-relief
hose to the T-fitting at the pressure-relief valve
65).
1. Retainer
2. Lower T-fitting
2. Remove the retainer that secures the pressure-relief
hose to the lower T-fitting, and remove the
pressure-relief hose from the machine
Note: Retain the 2 retainers for installation in
Installing the Pressure Relief Hose (page
longer need the pressure-relief hose.
3. Remove the retainer that secures the T-fitting with the
pressure-relief valve to the T-fitting in the top of the
sprayer pump (Figure
31
Figure 65
3. T-fitting (pressure-relief
valve)
4. Pressure-relief hose
(Figure
33); you no
66).
(Figure
65).