Toro Multi Pro 5800-D Installation Instructions Manual page 34

Installing the Sprayer Supply Hose
1. Assemble the straight barbed fitting of the sprayer
supply hose—25 x 486 mm (1 x 19-1/8 inches) into
the inlet port of the eductor shutoff valve
Figure 71
1. T-fitting (sprayer pump)
2. Inlet port (eductor shutoff
valve)
3. Straight barbed fitting
4. Retainer
2. Secure the straight barbed fitting to the eductor shutoff
valve with the retainer that is supplied with the shutoff
valve (Figure 71).
3. Assemble the 90° fitting of the sprayer supply hose
into the open port of the T-fitting of the sprayer pump
(Figure 71).
4. Secure the 90° fitting to the T-fitting with the retainer
(Figure 71) that you removed in step
Agitation Bypass and Sprayer Supply Hoses (page
(Figure 71).
5. 90° fitting
6. Retainer (eductor shutoff
valve)
7. Sprayer supply hose—25
x 486 mm (1 x 19-1/8
inches)
5 of Removing the
17).
Installing the Eductor Supply Hose
1. Assemble the 90° fitting of the eductor supply
hose—2.5 x 156.5 cm (1 x 61-5/8 inches) to the left
port of the eductor shutoff valve
1. Flange (eductor inlet)
2. Straight barbed fitting
3. Eductor shutoff valve
4. Gasket
2. Secure the 90° fitting to the eductor supply hose with
the retainer that is supplied with the shutoff valve
(Figure 72).
3. Align the flange of the straight barbed fitting for the
eductor supply hose and the gasket that you removed in
Removing the Eductor Supply Hose from the Eductor
(page 19) with the flange of the eductor inlet
72).
4. Secure the straight barbed fitting and gasket to the
eductor (Figure
retained in Removing the Eductor Supply Hose from
the Eductor (page
34
(Figure 72).
Figure 72
5. Flange clamp
6. 90° fitting
7. Retainer (eductor shutoff
valve)
8. Eductor supply hose—2.5
x 156.5 cm (1 x 61-5/8
inches)
72) with the flange clamp that you
19).
(Figure