Toro Multi Pro 5800-D Installation Instructions Manual page 14

5
Removing the Bypass, Drain,
and Agitation Components
No Parts Required
Removing the Bypass and Drain Hoses
1. Remove the retainer that secures the 90° hose fitting
to the adapter fitting at the bottom of the sprayer tank
(Figure 28).
Note: Retain the retainer for installation in
the Tank Drain Hose (page
Figure 28
1. Adapter fitting (bottom of
the sprayer tank)
2. Toward the bypass valve
3. Retainer
2. Remove the 90° hose fitting from the adapter fitting
(Figure 28).
3. Remove the retainer that secures the 90° hose fitting to
the end of the bypass valve for the right boom-segment
valve (Figure 29).
Installing
35).
4. Toward the drain valve
5. 90° hose fitting
1. Retainer
2. Socket (bypass valve)
4. Remove the 90° hose fitting from the bypass valve
(Figure 29).
5. Remove the bypass and drain hoses from the machine
(Figure 30).
6. Remove the hose clamp that secures the barbed fitting
of the drain valve to the drain hose, and remove the
fitting from the hose
Note: Retain the hose clamp, drain valve and barbed
fitting, and retainer for installation
Drain Hose (page
and drain hoses.
14
Figure 29
3. 90° hose fitting (bypass
hose)
Figure 30
(Figure 31).
Installing the Tank
35). You no longer need the bypass