Toro Multi Pro 5800-D Installation Instructions Manual page 33

Figure 69
1. Upper T-fitting
2. Flange (agitation bypass
valve)
3. Retainer
4. 90° barbed fitting
3. Secure the barbed flange fitting of the agitation bypass
hose and the gasket—25 x 35 mm (1 x 1-3/8 inches) to
the flange of the agitation bypass valve
flange clamp—40 to 64 mm (1-9/16 to 2-1/2 inches).
5. Barbed flange fitting
6. Gasket—25 x 35 mm (1 x
1-3/8 inches)
7. Flange clamp—40 to
64 mm (1-9/16 to 2-1/2
inches)
8. Agitation bypass hose—25
x 337 mm (1 x 13-1/4
inches)
(Figure 69) with
Installing the Pressure Relief Hose
1. Assemble the 90° fitting of the pressure-relief hose—25
x 298 mm (1 x 11-3/4 inches) into the open port of the
T-fitting at the pressure-relief valve
1. T-fitting (pressure-relief
valve)
2. Lower T-fitting
3. Retainer
2. Assemble the 90° fitting of the pressure-relief hose into
the open port of the lower T-fitting
3. Secure the 90° fittings to the T-fitting
the 2 retainers that you removed in step
Moving the Pressure-Relief Valve (page
33
(Figure 70).
Figure 70
4. 90° fitting
5. Pressure-relief hose—25
x 298 mm (1 x 11-3/4
inches)
(Figure 70).
(Figure
1 and
31).
70) with
2 of