Toro Multi Pro 5800-D Installation Instructions Manual page 19

Removing the Supply Hose from the
Hose Reel
Machines with the Electric Hose-Reel Kit
1. Remove the hose clamp that secures the supply hose to
the straight-hose barb of the hose reel
Figure 40
1. Supply hose
2. Hose clamp
2. Remove the hose from the hose barb
Note: You will remove the supply hose with the valve
mount in Removing the Valve Support (page
Removing the Eductor Supply Hose
from the Eductor
Machines with the Optional Eductor Kit
1. Remove the flange clamp that secures the straight
barbed fitting of the eductor supply hose to the inlet
flange of the eductor
(Figure 40).
3. Straight-hose barb
(Figure 40).
20).
(Figure 41).
1. Flange (eductor inlet)
2. Straight barbed fitting
2. Separate the straight barbed fitting from the eductor
and remove the gasket
Note: Retain the flange clamp and gasket for
installation in Installing the Eductor Supply Hose (page
34). You will remove the supply hose with the valve
mount in Removing the Valve Support (page
19
Figure 41
3. Gasket
4. Flange clamp
(Figure 41).
20).