Toro Multi Pro 5800-D Installation Instructions Manual page 23

Figure 49
1. Valve bracket
(sprayer-valve assembly)
2. Flange-head bolts (5/16 x
1 inch)
3. Torque the flange head bolts and flange locknuts to
199 to 254 N∙m (175 to 225 in-lb).
3. Flange locknuts (5/16
inch)
4. Valve mount
9
Installing the Valve Mount to
the Machine
No Parts Required
Procedure
Valve support, valves, and boom-section hoses weight:
approximately 30 kg (65 lb).
Have another person help you install the valve mount.
1. Align the holes in the valve mount with the holes in the
frame of the machine
1. Flange-head bolt (3/8 x 1
inch)
2. Valve mount
2. Assemble the valve mount to the frame
with the 4 flange-head bolts (3/8 x 1 inch) and 4 flange
locknuts (3/8 inch) that you removed in
Valve Support (page
3. Torque the flange head bolts and flange locknuts to 37
to 45 N∙m (27 to 33 ft-lb).
4. Align the holes in the lower T-fitting with the slots in
the valve mount
23
(Figure 50).
Figure 50
3. Frame of the machine
4. Flange locknut (3/8 inch)
(Figure
Removing the
20).
(Figure 51).
50)