Toro Multi Pro 5800-D Installation Instructions Manual page 35

13
Installing the Section Bypass
and Drain-Hose Assembly
Parts needed for this procedure:
1 Bypass and drain-hose assembly
1 Support clamp
1 Flange-head bolt (5/16 x 3/4 inch)
1 Washer (5/16 inch)
Installing the Tank Drain Hose
1. Assemble the barbed fitting of the drain valve that you
removed in step 6 of
and Agitation Components (page 13)
hose—104 cm (41 inches) of the bypass and drain-hose
assembly (Figure 73).
Figure 73
1. Drain valve
2. Hose clamp
2. Secure the drain valve to the hose with the hose clamp
(Figure 73) that you removed in step
the Bypass, Drain, and Agitation Components (page
13).
3. Align the bypass and drain-hose assembly to the back
of the machine (Figure
5 Removing the Bypass, Drain,
to the drain
3. Drain hose—2.5 x 104 cm
(1 x 41 inches)—bypass
and drain-hose assembly
6 of 5 Removing
74).
1. Drain-Hose Assembly
4. Assemble the 90° hose fitting of the drain hose—2.5
x 67 cm (1 x 26-1/2 inches) with adapter fitting at the
bottom of the sprayer tank
1. Drain hose—2.5 x 67 cm
(1 x 26-1/2 inches)
2. Retainer
5. Secure the 90° hose fitting to the adapter fitting with
the retainer (Figure
Removing the Bypass and Drain Hoses (page
35
Figure 74
(Figure 75 and Figure
Figure 75
Figure 76
3. 90° hose fitting
4. Adapter fitting (bottom of
the sprayer tank)
76) that you removed in step
76).
1 of
14).