Disconnecting The Battery - Toro Multi Pro 5800-D Installation Instructions Manual

Disconnecting the Battery

1. Extend the left and right boom sections to the
horizontal position.
2. Rotate the
KEY SWITCH
remove the key; refer to the Operator's Manual.
3. Remove the battery cover and disconnect the negative
(black—ground) cable from the battery post
3 and Figure 4).
WARNING
Electrical sparks can cause the battery gasses
to explode, resulting in personal injury.
Incorrect battery cable routing could damage
the sprayer and cables, causing sparks.
• Always disconnect the negative (black)
battery cable before disconnecting the
positive (red) cable.
• Always connect the positive (red) battery
cable before connecting the negative
(black) cable.
Battery terminals or metal tools could short
against metal sprayer components, causing
sparks.
• When removing or installing the battery,
do not allow the battery terminals to touch
any metal parts of the sprayer.
• Do not allow metal tools to short between
the battery terminals and metal parts of
the sprayer.
• Always keep the battery strap in place to
protect and secure the battery.
1
3
2
1. Battery cover
2. Strap
to the O position, and
FF
G014029
Figure 3
3. Buckle
(Figure
1. Positive battery cable
2. Positive battery post
4. Disconnect the positive (red) cable from the battery
post (Figure
5. Tilt both seats forward and secure them by moving
the prop rods into the detents at the end of the slots
at the center-console base.
6. Allow the engine to cool completely.
6
Figure 4
3. Negative battery post
4. Negative battery cable
4).