Figure 15
1. 10-socket
connector—sprayer-harness
interconnect (front wire
harness)
2. 10-pin
connector—sprayer-harness
interconnect (rear wire
harness)
Figure 16
1. 3-socket connector—flow
meter (front wire harness)
2. 3-pin connector—flow
meter (rear wire harness)
Figure 17
1. 8-socket
connector—sprayer-harness
interconnect (front wire
harness)
2. 8-pin
connector—sprayer-harness
interconnect (rear wire
harness)
Figure 18
1. 2-socket connector—rinse
pump (front wire harness)
2. 2-pin connector—rinse
pump (rear wire harness)
3. Front of the machine
3. Front of the machine
3. Front of the machine
3. Front of the machine
1. 10-pin
connector—sprayer-harness
interconnect (front wire
harness)
2. 10-socket
connector—sprayer-harness
interconnect (rear wire
harness)
3. Remove the 3 push-in fasteners of the rear wire harness
that secure the harness at the holes in the right frame
tube of the machine
1. Rear wire harness
2. Right frame tube
11
Figure 19
3. Front of the machine
(Figure
20).
Figure 20
3. Front of the machine
4. Push-in fastener