Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
10.2.17 How Do I Export Data?
Context
One-click export allows you to export current alarms, historical alarms, and logs.
You are advised to use the FAT32 USB flash drive with a capacity no greater than
64 GB. Format the non-FAT32 USB flash drives into FAT32 ones before using them.
Before using a USB flash drive, ensure that its data has been scanned by antivirus
software and is secure.
Procedure
Step 1 Tap Maint > USB Operations > Export to enter the Select Path screen, as shown
in
Figure
Figure 10-16 Select Path screen
Issue 04 (2022-06-30)
NO TE
After default settings are restored, all communication addresses are changed to 1 and the
communication between all devices and the NMS is disconnected. The communication
addresses must be reset to recover the communication.
NO TICE
NO TE
● Before exporting active alarms, historical alarms, logs, and configurations, ensure that
the USB flash drive has been successfully identified.
● If the USB flash drive has been successfully identified,
status bar.
● If the USB flash drive is not properly connected, the system will display No USB device
found. during operations about the USB flash drive.
10-16.
Copyright © Huawei Technologies Co., Ltd.
10 FAQ
is displayed in the
171
Advertisement
Table of Contents
