Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Step 2 Open the Service Expert app on the mobile phone.
After factory settings are restored, startup verification is required.
Step 3 Tap Startup on the home screen of the app.
Figure 6-14 Offline activation
Step 4 Tap Offline Activation.
Figure 6-15 Generating a startup password
Step 5 On the Offline Activation screen of the display module, specify BarCode and
Codes that are available on home screen of the controller, and tap Generate PWD
to generate a startup password.
Step 6 Tap Password on the screen of the unit and enter the generated startup password
in the displayed dialog box.
Step 7 After startup, the system automatically enters the wizard-based startup mode.
----End
Issue 04 (2022-06-30)
NO TICE
NO TE
Tap
and scan the QR code on the Set Startup screen of the display module. The
barcode and verification code are automatically entered on the app.
NO TE
To ensure security, the original password becomes invalid and the initial startup
authentication fails if the startup verification fails.
Copyright © Huawei Technologies Co., Ltd.
6 Power-On and Commissioning
98
Advertisement
Table of Contents
