Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
6.6 Wizard Startup
Context
Wizard Startup allows you to commission the indoor fan, spray system, exhaust
fan, and cooling system, and supports automatic running and judgment of
components.
After you power on the smart cooling product for the first time, the Wizard
Startup screen is displayed. If the smart cooling product is started not for the first
time, choose Maint > Wizard Startup to enter the Wizard Startup screen.
Tapping No or Exit, a submission timeout, and a system exception during
commissioning all result in commissioning failures. To start the commissioning
again, choose Maint > Wizard Startup to enter the Wizard Startup screen.
Procedure
Step 1 On the home screen, choose Maint > Wizard Startup.
Step 2 Read the precautions on the screen and confirm whether to access the wizard-
based startup mode.
●
●
Figure 6-16 Precautions for wizard-based startup
Step 3 Tap Yes to read the check items on the screen and confirm whether each item is
verified. After finishing the check:
Issue 04 (2022-06-30)
NO TICE
Tap Yes to enter the screen for checking before wizard-based startup.
Tap No to exit the wizard-based startup mode.
NO TE
● For the initial wizard-based startup, Last Record is in gray, indicating that operation is
not allowed.
● For a non-initial wizard-based startup, you can choose Last Record to view the last
wizard-based startup report.
Copyright © Huawei Technologies Co., Ltd.
6 Power-On and Commissioning
99
Advertisement
Table of Contents
