Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Step 2 Set parameters.
Parameter
WiFi SSID
WiFi password
Enable WiFi
WiFi group sharing
enable
Step 3 Tap Submit.
----End
6.4.4 (Optional) Setting Teamwork Parameters
Prerequisites
The teamwork group number and addresses for the units have been set as follows:
●
●
Context
The parameters in this section are for reference only. Set practical parameter
values as required.
Procedure
Step 1 On the home screen, tap
Settings screen.
Issue 04 (2022-06-30)
Teamwork group No.: Group the units in same aisle or adjacent areas as one,
that is, assign one teamwork group number for them. At most four teamwork
groups can be assigned (1–4).
System address: The address (configurable range: 1–32) of each unit in the
same group must be unique. The unit with the smallest unit address is the
master unit, which collects, processes, and delivers group data.
Copyright © Huawei Technologies Co., Ltd.
Description
Set WiFi SSID based on the actual configuration; WiFi
SSID is the name used for the WiFi hotspot over which
a mobile phone can connect to the smart cooling
product.
Enter the WiFi password when you use a mobile phone
to connect to the WiFi. The WiFi has no preset
password. When you enable the WiFi function for the
first time, you need to set a password.
Enables the WiFi function of the smart cooling product.
The default status is Disable.
When a mobile phone is connected to the WiFi of the
smart cooling product, it can access the units in the
same FE cascading network.
> Teamwork Settings to enter the Teamwork
6 Power-On and Commissioning
90
Advertisement
Table of Contents
