Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Prerequisites
●
●
●
Context
The exterior of the unit should be intact. If the surface is bumped, scratched, or
rusted, the paint should be repaired.
Issue 04 (2022-06-30)
Points for attention before paint repair: The front, rear, left, and right surfaces
of the unit are grade A surfaces, and the bottom and top surfaces are grade B
surfaces.
–
The color may be slightly different when grade A surfaces are repainted.
Reach an agreement with the customer before repainting.
–
Acceptance criteria for repainting of grade B surfaces: The repainted area
should have the same color as surrounding areas. The color difference ΔE
is not greater than 3. (Use a colorimeter to measure the color difference.
If a colorimeter is not available, check that no obvious boundary exists
between the repainted area and its surrounding.) The paint should also
be free from bulges, scratches, flake-off, or cracks.
Ensure that the outdoor area without shelters is not subject to bad weather
conditions such as raining, sandstorm, strong wind, or snowing during paint
repair.
Paint that meets the requirements has been prepared based on the color
cards.
NO TE
Color card check methods:
● See the color cards delivered with the containers.
● Ask the customer to search for the color codes and types required.
● If no color card is found, contact technical support to query the archived painting
solution (color codes and types used in the project).
NO TE
Check the paint damage on the unit and prepare appropriate tools and materials. The
number of materials depends on site requirements.
Copyright © Huawei Technologies Co., Ltd.
D
Repainting the Unit
D Repainting the Unit
185
Advertisement
Table of Contents
