Table of Contents
Advertisement
FusionCol8000-E400 Modular Indirect Evaporative
Cooling System
User Manual
Paint Damage
Dent
Procedure
Step 1 Gently polish the damaged areas using fine sandpaper (minimum grit size: 180) to
remove smudges or rust.
Figure D-1 Polishing a damaged area using sandpaper
Step 2 Dip a piece of cotton cloth into anhydrous alcohol and wipe the polished or
damaged area to remove the dirt and dust. Then wipe off the alcohol with a clean
and dry cotton cloth.
Issue 04 (2022-06-30)
Tools and
Materials
1. If a dent is less than 100 mm
mm in depth, fill the dent with Poly-Putty base and then
perform the same operations as those for processing deep
scratches.
2. If a dent is greater than 100 mm
3 mm in depth, ask the local supplier for an appropriate
repainting solution.
Copyright © Huawei Technologies Co., Ltd.
D Repainting the Unit
Procedure
Description
2
in area and less than 3
2
in area or greater than
187
Advertisement
Table of Contents
