FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
9
9.1 Installing Power Supply and Distribution Devices
9.1.1 (Optional) Installing Battery Packs
Prerequisites
The pre-fab. modules have been installed.
Context
Battery packs are installed inside the battery cabinet.
Preparations
Tools: Phillips screwdriver, pallet truck, adjustable wrench, protective gloves
Materials: insulation tape, battery pack, copper bar or cable
Documents: battery cabinet-1 configuration table, battery pack wiring diagram
Skill requirement: personnel qualified for installing batteries
Procedure
Step 1 Determine the battery pack installation position based on the battery cabinet-1
configuration table.
Step 2 Take out mounting ears from the battery pack fitting bag, and install the
mounting ears on the battery pack using eight M4 screws.
Issue 07 (2022-12-15)
Installing Devices Inside Pre-fab.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Installing Devices Inside Pre-fab. Modules
Modules
75