Removing The Pre-Fab. Module Protective Cover - Huawei FusionModule1000A40 Installation Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Figure 5-11 Installing a twistlock for a single-capacity base
It is recommended that you tighten the base twistlocks after pre-fab. modules are hoisted in
place.
----End

5.2.2 Removing the Pre-fab. Module Protective Cover

Prerequisites
The weather condition is good without rain or snow.
Context
A protective cover is installed to protect the pre-fab. module during transportation.
Preparations
Tools: safety helmet, safety belt, step ladder, protective gloves, utility knife
Materials: none
Skill requirement: common technician
Procedure
Step 1 Cut open the protective cover using a utility knife and remove the protective cover.
----End
Issue 07 (2022-12-15)
NO TE
NO TE
When removing the protective cover, take protective measures for working at heights.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Installing Pre-fab. Modules
50