FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Figure 6-1 Composition of the external cable tray
(1) Long cable tray
(4) M10 bolt assemblies
Procedure
Step 1 Locate the external cable tray installation position, and remove the rubber plugs
from the corresponding mounting holes in the pre-fab. module using a Phillips
screwdriver.
Step 2 Secure the short cable tray to the ports reserved on the pre-fab. module.
Issue 07 (2022-12-15)
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Installing External Accessories for Pre-fab. Modules
(2) Short cable tray
(5) M8 bolt assemblies
(3) Fastener
57