Huawei FusionModule1000A40 Installation Manual page 81
Prefabricated all-in-one data center
Hide thumbs
Also See for FusionModule1000A40:
- Maintenance manual (179 pages) ,
- Initial configuration parameter manual (109 pages) ,
- Product description (89 pages)
Table of Contents
Advertisement
FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
Procedure
Step 1 Remove the bolts from the sliding door fasteners using an adjustable wrench, and
remove the sliding door fasteners.
Figure 8-6 Removing the sliding door fasteners
Step 2 Remove the piston rings, and install them in the screw holes in the floor under the
sliding door and the beam above the sliding door.
Issue 07 (2022-12-15)
NO TE
Keep the removed sliding door fasteners for future use in case the pre-fab. modules need to
be relocated.
NO TE
The plugs are packed and secured above the door handle before delivery.
Copyright © Huawei Digital Power Technologies Co., Ltd.
8 Removing Transport Protection Materials
73
Advertisement
Table of Contents
