Measuring Cables - Huawei FusionModule1000A40 Installation Manual

FusionModule1000A40 Prefabricated All-in-One
Data Center
Installation Guide
●
Figure A-1 Cable ties without sharp burs
Figure A-2 Cable ties in the same direction
Bending Cables
When bending cables, observe the following rules:
●
●
●
A.1.2 Measuring Cables
Prerequisites
●
●
Preparations
Tools: thin rope, protective gloves, and measuring tape
Material: cable
Issue 07 (2022-12-15)
Extra cables must be coiled neatly and easy to find.
Cables must not be overly bent because over bending may damage the cable
cores.
The bending radius of a cable must be more than twice the cable diameter.
The bending radius near a connector outlet must be more than four to six
times the cable diameter.
Cables must not be tied where they bend.
Figure A-3 Binding cables at a turning point
Pre-fab. modules have been installed.
External cable trays have been installed.
Copyright © Huawei Digital Power Technologies Co., Ltd.
A Basic Installation Operations
108