ABB Relion 670 Series Applications Manual page 436

Section 16
Logic
16.4.1.1 Application
Group warning logic function WRNCALH is used to route warning signals to LEDs and/or output
contacts on the IED.
WRNCALH output signal WARNING and the physical outputs allows the user to adapt the warning
signal to physical tripping outputs according to the specific application needs.
16.4.1.2 Setting guidelines
OperationEnabled or Disabled
16.5 Logic for group indication INDCALH
16.5.1 Identification
Function description
Logic for group indication
16.5.1.1 Application
Group indication logic function INDCALH is used to route indication signals to different LEDs
and/or output contacts on the IED.
INDCALH output signal IND and the physical outputs allows the user to adapt the indication signal
to physical outputs according to the specific application needs.
16.5.1.2 Setting guidelines
Operation : Enabled or Disabled
16.6 Configurable logic blocks
The configurable logic blocks are available in two categories:
• Configurable logic blocks that do not propagate the time stamp and the quality of signals.
They do not have the suffix QT at the end of their function block name, for example,
SRMEMORY. These logic blocks are also available as part of an extension logic package with
the same number of instances.
• Configurable logic blocks that propagate the time stamp and the quality of signals. They have
the suffix QT at the end of their function block name, for example, SRMEMORYQT.
16.6.1 Application
A set of standard logic blocks, like AND, OR etc, and timers are available for adapting the IED
configuration to the specific application needs. Additional logic blocks that, beside the normal
430
IEC 61850
identification
INDCALH
© Copyright 2017 ABB. All rights reserved
IEC 60617 ANSI/IEEE C37.2
identification device number
- -
1MRK 511 401-UUS F
GUID-FC0DBB7B-FF86-44BF-83D6-DDF120A176DE v1
GUID-B08F2636-33DA-4937-92EB-1A8AC0909AB4 v2
GUID-3B5D4371-420D-4249-B6A4-5A168920D635 v4
GUID-9BAD30FB-4B75-4E14-82A8-6A59B09FA6EA v1
GUID-7E776D39-1A42-4F90-BF50-9B38F494A01E v2
IP11009-1 v4
GUID-F5D6F065-441B-4296-AC56-F4DC1F5487E3 v3
Bay control REC670
Application manual