ABB Relion 670 Series Applications Manual page 411

1MRK 511 401-UUS F
Function n
IEC04000207 V2 EN-US
Figure 192: Application example showing a logic diagram for control of built-in functions
Device 1
ANSI04000208 V2 EN-US
Figure 193: Application example showing a logic diagram for control of external devices via
14.11.3 Setting guidelines
The parameters for Single command, 16 signals (SINGLECMD) are set via the local HMI or PCM600.
Parameters to be set are MODE, common for the whole block, and CMDOUTy which includes the
user defined name for each output signal. The MODE input sets the outputs to be one of the types
Disabled, Steady, or Pulse.
Bay control REC670
Application manual
Single
command
function
SINGLECMD
CMDOUTy
OUTy
Single
command
function
Configuration logic circuits
SINGLESMD
CMDOUTy
OUTy
User-
defined
conditions
configuration logic circuits
© Copyright 2017 ABB. All rights reserved
Function n
en04000207.vsd
AND
en04000208_ansi.vsd
Section 14
Control
M12448-3 v2
405