ABB ACSM1 Firmware Manual page 158

158
(2) HIGH
(3) ABS LOW
(4) ABS HIGH
33.10 SUPERV3 ACT
Selects the signal to be monitored by supervision 3. See parameter
Value pointer: Group and index
33.11 SUPERV3 LIM HI
Sets the upper limit for supervision 3. See parameter
-32768...32768
33.12 SUPERV3 LIM LO
Sets the lower limit for supervision 3. See parameter
-32768...32768
Parameters and firmware blocks
When the signal selected by parameter
exceeds the value of parameter
SUPERV STATUS is activated.
When the absolute value of the signal selected by parameter
SUPERV3 ACT falls below the value of parameter
LIM LO, bit 2 of 6.14 SUPERV STATUS
When the absolute value of the signal selected by parameter
SUPERV3 ACT exceeds the value of parameter
HI, bit 2 of 6.14 SUPERV STATUS
FW block: SUPERVISION
FW block: SUPERVISION
33.09 SUPERV3
Upper limit for supervision 3.
FW block: SUPERVISION
33.09 SUPERV3
Lower limit for supervision 3.
33.10 SUPERV3 ACT
33.11 SUPERV3 LIM
33.12 SUPERV3
is activated.
33.11 SUPERV3 LIM
is activated.
(see above)
33.09 SUPERV3
(see above)
FUNC.
(see above)
FUNC.
HI, bit 2 of 6.14
33.10
33.10
FUNC.