ABB ACSM1 Firmware Manual page 118

118
-11...11 V / -22...22 mA
13.08 AI2 MIN
Defines the minimum value for analogue input AI2. The type is selected with jumper J2 on the JCU
Control Unit.
-11...11 V / -22...22 mA
13.09 AI2 MAX SCALE
Defines the real value that corresponds to the maximum analogue input value defined by parameter
13.07 AI2
13.10
-32768...32768
13.10 AI2 MIN SCALE
Defines the real value that corresponds to the minimum analogue input value defined by parameter
13.08 AI2
-32768...32768
13.11 AITUNE
Triggers the AI tuning function.
Connect the signal to the input and select the appropriate tuning function.
(0) NO ACTION
(1) AI1 MIN TUNE
(2) AI1 MAX TUNE
(3) AI2 MIN TUNE
(4) AI2 MAX TUNE
Parameters and firmware blocks
Maximum AI2 input value.
FW block:
Minimum AI2 input value.
FW block:
MAX.
AI (mA / V)
13.07
13.09
13.08
Real value corresponding to value of parameter 13.07.
FW block:
MIN. See parameter 13.09 AI2 MAX
Real value corresponding to value of parameter 13.08.
FW block: None
AI tune is not activated.
Current analogue input AI1 signal value is set as minimum value for
AI1, parameter
ACTION
Current analogue input AI1 signal value is set as maximum value for
AI1, parameter
ACTION
Current analogue input AI2 signal value is set as minimum value for
AI2, parameter
ACTION
Current analogue input AI2 signal value is set as maximum value for
AI2, parameter
ACTION
AI2 (see above)
AI2 (see above)
AI (real)
AI2 (see above)
SCALE.
13.03 AI1 MIN. The value reverts back to
automatically.
13.02 AI1 MAX. The value reverts back to
automatically.
13.08 AI2 MIN. The value reverts back to
automatically.
13.07 AI2 MAX. The value reverts back to
automatically.
(0) NO
(0) NO
(0) NO
(0) NO