SmartLogger1000
User Manual
6.2.3 Manually Powering On or Off the Inverter on the
monitoring panel
This topic describes how to power on or off the inverter on the monitoring panel.
Procedure
Choose Batch Power-On/Off under Maintenance to power on or off all inverters that
connect to the SmartLogger.
LCD
Issue 12 (2019-01-15)
The following table shows the procedure for powering on or off the inverter on the
monitoring panel. The parameter values in the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default screen, press
the main menu.
2. Choose
and press
3. Select an inverter and press
NOTE
SUN2000 (1--2) on the left indicates that the
inverter connects to Port 1 of the SmartLogger and
the communications address of the RS485 port is 2.
6 User Interface
to enter
.
.
68