Setting The System Language - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual

6.2.20 Setting the System Language

This topic describes how to set the display language for the SmartLogger on the monitoring
panel.
Procedure

LCD
Issue 12 (2019-01-15)
The following table describes the procedure for setting the display language. The
parameter values in the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default screen, press
the main menu.
2. Choose and press
3. Specify the User Name and Password by
pressing or , and then press
NOTE

Because of the limited permission, select the
User Name as Common User or Advanced
User. The initial password for Common User
and Advanced User is 000001.
 After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit from the Settings page
and log in again within 30 seconds, no
authentication is required.
6 User Interface
to enter
.
.
106