Huawei SmartLogger1000 User Manual page 165

SmartLogger1000
User Manual
Setting the IP Address
Correctly set the IP address, subnet mask, and gateway for the SmartLogger, PC, and network
devices (when connected).
Setting the LAN


Step 1 Open Internet Explorer.
Step 2 Choose Tools > Internet Options.
Step 3 Click the Connections tab and then click LAN settings.
Figure 7-1 LAN setting (1)
Step 4 Deselect User a proxy server for your LAN.
Issue 12 (2019-01-15)
If the SmartLogger is connected to a local area network (LAN) and a proxy server has
been set, you need to cancel the proxy server settings.
If the SmartLogger is connected to the Internet and the PC is connected to the LAN, do not
cancel the proxy server settings.
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
152