Setting Running Parameters - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual

7.8.6.2 Setting Running Parameters

Because of permission restriction, log in as Advanced User. Choose Monitoring > PID >
Running Param. to access the target page.
Figure 7-29 Setting running parameters
The parameter list provided in this document includes all configurable parameters.
Configurable parameters vary depending on the device model. The actual screen prevails.
Table 7-10 Parameter description
No Paramet Function
. er Name
1 Offset Specifies the
mode offset mode of the
PID module.
Issue 12 (2019-01-15)

You can click the
tab on the tertiary navigation menu to query PID module-related information.
 Performance data of the PID module can be exported. When changing the name of the exported file,
retain the extension .tar.gz. Otherwise, the file will be unavailable.
Paramet
er Value
Disabled
N/PE
Copyright © Huawei Technologies Co., Ltd.
,
Description
Set this parameter to Disable if the PID module is not
required.
Set this parameter to N/PE if the PID module is required
to use voltage output from the inductor virtual midpoint N.
7 WebUI
, , or
207