Huawei SmartLogger1000 User Manual page 69

SmartLogger1000
User Manual
Procedure

LCD
Issue 12 (2019-01-15)
The following table describes the process for setting initialization parameters. The
parameter values in the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. After startup, the SmartLogger enters the
initialization page.
The default system language is English.
2. Press to enter the Wizard page.
To return to the default page, press ESC. If
some later re-settings are required, refer to
6.2.20 Setting the System
Setting System Time Parameters, and
Setting Communications
3. Select a display language and then press
.
The pages will be displayed in the selected
language.
4. Set the correct date and time and then press
.
 To select the specific parameter, press
To set the parameter value, press
.
 The date and time are displayed in the
formats of YYYY-MM-DD and hh:mm:ss
respectively. YYYY stands for the year,
MM the month, DD the date, hh the hour,
mm the minute, and ss the second.
NOTICE
After the Time is successfully set, this time can be
synchronized in all the inverters connected to the
SmartLogger.
5 System Operation
Language, 6.2.21
6.2.26
Parameters.
.
or
56