SmartLogger1000
User Manual
Figure 7-60 USB configuration
7.10.5 Alarm Output
After an inverter alarm is linked to a DO port, the alarm signal is delivered from the DO port
when the inverter generates the alarm.
Because of permission restriction, log in as Advanced User. Choose Settings > Alarm
Output.
Issue 12 (2019-01-15)
Before linking an inverter alarm to a DO port, ensure that the DO port is not set for other purposes.
Otherwise, the setting will fail.
After the function is enabled, the DO port status may change and the alarm output may be abnormal
if the SmartLogger restarts or powers off.
Copyright © Huawei Technologies Co., Ltd.
7 WebUI
234