Huawei SmartLogger1000 User Manual page 84

SmartLogger1000
User Manual
Procedure

LCD
Issue 12 (2019-01-15)
The following table describes the procedure for sending a reset command to the inverter.
The parameter values in the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Procedure
1. On the default screen, press
the main menu.
2. Choose and press
3. Select an inverter and press
NOTE
SUN2000 (1--2) on the left indicates that the
inverter connects to Port 1 of the SmartLogger and
the communications address of the RS485 port is 2.
4. Choose Maintenance, and press
6 User Interface
to enter
.
.
.
71