SmartLogger1000
User Manual
Step 5 Set Security level for this zone to Medium or Low.
----End
7.3 Logging In to the WebUI
Context
The SmartLogger has been connected to a PC directly or over the Ethernet. For details, see
4.8 Connecting an Ethernet Network
If you log in to the WebUI for the first time, a security risk warning shown in
displayed. Click Continue to this website. to continue the WebUI login.
Figure 7-5 Security risk warning
Procedure
Step 1 Enter https://XX.XX.XX.XX in the address box of the browser, and press Enter. The login
page is displayed.
Issue 12 (2019-01-15)
It is recommended that users use their own certificates. If the certificate is not replaced, the security
risk warning will be displayed during each login.
After logging in to the WebUI, you can import a certificate under Network Security Certification
on the
7.11.3 Setting Security Parameters
The imported security certificate needs to be bound to the SmartLogger IP address. Otherwise, the
security risk warning will still be displayed during login.
Copyright © Huawei Technologies Co., Ltd.
Cable.
page.
7 WebUI
Figure 7-5
is
155