Huawei SmartLogger1000 User Manual page 151

SmartLogger1000
User Manual


Procedure

LCD
Issue 12 (2019-01-15)
If Data Clear is performed on Huawei devices such as the inverter and PID module,
Alarm Reset must be performed on the SmartLogger and NMS. Otherwise, the
SmartLogger cannot collect alarm information generated by the devices after Data Clear
is performed.
If Alarm Reset or Data Clear is performed on the SmartLogger, Alarm Reset must also
be performed on the NMS. Otherwise, the NMS cannot obtain alarm information collected
by the SmartLogger after Alarm Reset or Data Clear is performed.
The following table describes the procedure for managing the devices. The parameter
values in the following figures are for reference only.
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
1. On the default screen, press
the main menu.
2. Choose and press
3. Enter the User Name and Password by
pressing or , and then press
NOTE
 Because of the limited permission, select the
User Name as Advanced User or Special
User. The initial password for Advanced User
and Special User is 000001.

After passing the permission validation, the
system keeps the authentication information for
30 seconds. If you exit the screen and log in
again within the 30 seconds, no permission
authentication is required.
6 User Interface
to enter
.
.
138