SmartLogger1000
User Manual
LCD
----End
6.2.22 Setting SmartLogger Contrast
You can set the SmartLogger contrast on the monitoring panel.
Issue 12 (2019-01-15)
Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
5. Choose Date&Time or Date Format by
pressing
, and press
NOTICE
Modifying Date&Time will affect the integrity
of the SmartLogger's energy yield and
performance data. Hence, do not change it at
will.
After Date&Time is successfully set, this time
can be synchronized in all the inverters
connected to the SmartLogger.
6. On the Date&Time page, set the date and
time, set the time zone, enable or disable the
daylight saving time, and press
To select the specific parameter, click
set the parameter value, set
7. On the Date Format page, select a date
format, and press
.
6 User Interface
.
.
. To
or
.
109