Huawei SmartLogger1000 User Manual page 130

SmartLogger1000
User Manual
LCD
Here use the pages displayed when you
log in to the SmartLogger as Advanced
User.
Issue 12 (2019-01-15)
If you want to change the password for another account, exit from the Settings screen (without logging
in to the Maintenance screen), wait 30 seconds, log in by using the account for which you want to
change the password, and perform step 3 to step 7 in the preceding table.
Copyright © Huawei Technologies Co., Ltd.
Procedure
4. Select User Password by pressing
press .
5. Enter the old password and press
Increase or decrease the value by pressing
or . Switch between data bits by pressing
.
6. Enter a new password and press
Increase or decrease the value by pressing
or . Switch between data bits by pressing
.
7. Enter the new password again and press
.
NOTE
Ensure that you enter the new password twice
coherently. Otherwise, an error message is
displayed.
After the password is changed successfully,
the LCD displays operation success
information.
6 User Interface
, and
.
.
117