Setting Usb Parameters - Huawei SmartLogger1000 User Manual

SmartLogger1000
User Manual
Figure 7-56 Connecting three DO ports
Log in as Advanced User. Choose Settings > DO, and set the corresponding DO port to
Reset the external router.
Figure 7-57 DO configuration
Connecting the Horn Strobe over the DO Port
Connect one DC power cable of the horn strobe to one of the DO ports, and power on or off
the horn strobe by connecting or disconnecting the DO dry contact to achieve the audible and
visual alarm for grounding faults.
Log in as Advanced User. Choose Settings > DO, and set the corresponding DO port to
Ground fault audit and vis alm.
Figure 7-58 DO Configuration

7.10.4.2 Setting USB Parameters

This topic describes how to set USB parameters for resetting an external 3G router over the
WebUI.
Issue 12 (2019-01-15) Copyright © Huawei Technologies Co., Ltd.
7 WebUI
232