Huawei SmartLogger1000 User Manual page 153

SmartLogger1000
User Manual
LCD
Issue 12 (2019-01-15) Copyright © Huawei Technologies Co., Ltd.
Operation Procedure
6. Choose Add Manually and press
NOTE

EMI, slave SmartLogger, power meter, PLC,
and third-party devices must be manually
added.
 If the communication is abnormal, or the
address on the port has been used, the device
cannot be added.
7. Choose Single Remove and press
twice.
NOTE
For devices that no longer exist in the PV power
system, remove them in time to avoid wasting
system resources.
6 User Interface
.
140