Huawei SmartLogger1000 User Manual page 33

SmartLogger1000
User Manual
Context


Procedure
Step 1 Install the expansion tubes and screws.
If you need to use a ladder to install the SmartLogger on a high position, keep balance to
protect yourself from falling down.
1.
2.
Issue 12 (2019-01-15)
Install the SmartLogger on a solid and smooth wall to ensure that it can be secured on the
wall.
Before hanging the SmartLogger on the screws, secure the expansion tubes and screws
into the wall.
Use a plumb line to ensure that the line between the centric points of the two holes is
vertical to the ground. Use a marker to mark out the holes, as shown in
Figure 3-3 Hole positions and dimensions
Drill holes using a hammer drill and install expansion tubes and screws, as shown in
Figure 3-4.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
Figure 3-3.
20