SmartLogger1000
User Manual
Parameter
Signal
NOTE
7.8.5 Power Meter
7.8.5.1 Querying Related Information
Choose Monitoring > Meter and query related information on the displayed page.
Figure 7-26 Querying the meter information
7.8.5.2 Setting Running Parameters
Because of permission restriction, log in as Advanced User. Choose Monitoring > Meter >
Running Param. to access the target page.
Issue 12 (2019-01-15)
Signal-related parameters
include Signal Name, Signal
address, Gain, and Offset.
You can click the
the tertiary navigation menu to query meter information.
The performance data of the meter can be exported. When changing the name of the exported file,
retain the extension .tar.gz. Otherwise, the file will be unusable.
Set running parameters only for the power meter that supports the DL/T645 protocol.
Copyright © Huawei Technologies Co., Ltd.
Description
Set this parameter based on the vendor's protocol.
NOTE
If the EMI can collect a certain signal, set Signal address to the
address of the corresponding register. If not, set Signal address to
65535.
,
7 WebUI
, or
tab on
205