Logging In To The Webui - Huawei SmartLogger2000 User Manual

SmartLogger2000-(10-C, 11-C)
User Manual

7.3 Logging In to the WebUI

Context
The SmartLogger has been connected to a PC directly or over the Ethernet. For details, see
4.11 Connecting an Ethernet Network
Procedure
Step 1 Enter https://XX.XX.XX.XX in the address box of the browser, and press Enter. The login
page is displayed.
Figure 7-12 Login page
Step 2 Set Language, User Name, and Password, and then click Log In.
Issue Draft A (2017-02-15)
The IP address of the SmartLogger can be obtained as follows:

When logging in to the app for the first time, obtain information including IP address from
Ethernet under Quick Settings.
 When logging in to the APP subsequently, choose Settings > Comm. Param > Ethernet to view the
information.
 To restore the IP address to the default IP address, press and hold down the Default key for more
than 10s until the RUN indicator blinks at short intervals (0.125s on and 0.125s off) and all other
indicators are off, and then release the Default key. The operation is valid within 5 minutes.
XX.XX.XX.XX is the IP address for the SmartLogger. For example, the default IP address for the
SmartLogger is https://192.168.0.10.

The initial password is Changeme for system users Common User, Advanced User, and Special
User.

After the first login, change the initial password immediately to ensure account security.

If you enter wrong passwords for six consecutive times in 5 minutes, your account will be locked out.
You have to try again with the account 10 minutes later.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Cable.
7 WebUI
80