Management System Power-On Commissioning; Preparations And Webui Login - Huawei FusionModule500 V100R021C10 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Exception Handling
Step 1 Check that the T/H control mode and T/H set point are properly set.
Step 2 Check that the current time is correctly set.
Step 3 Check that the return air filter is installed in the correct direction.
----End

5.3 Management System Power-On Commissioning

5.3.1 Preparations and WebUI Login

Prerequisites
●
●
●
Procedure
Step 1 Connect a network cable between the PC network port and the WAN_1 port
(protected by a security mechanism) on the ECC800-Pro.
Table 5-3 Default IP addresses for the WAN and LAN ports on the ECC800-Pro
Port
WAN_1
WAN_2
LAN_1 and LAN_2
Issue 01 (2020-11-30)
The operating system of Windows 7 or later is supported.
It is recommended that the screen resolution be 1366 x 768 or higher.
Browser: IE9 and later versions; Firefox and later versions; Chrome and later
versions
Copyright © Huawei Technologies Co., Ltd.
Default IP Address
192.168.8.10
192.168.0.10
192.168.248.10
192.168.248.10
5 Power-On Commissioning
117