Replacement Of Power Supply; Replacement Of Customer I/O Power Supply - ABB IRC5 Product Manual

4 Repair

4.21.1 Replacement of customer I/O power supply

4.21 Replacement of power supply

4.21.1 Replacement of customer I/O power supply
Location
The customer I/O power supply is shown in the following illustration.
xx0600003258
Required equipment
Equipment
Customer I/O power supply
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Circuit diagram
Removal
The procedure below details how to remove the customer I/O power supply.
1
Continues on next page
212
Action
DANGER
Before commencing any work inside the cabinet,
please observe the safety information in section
Make sure that the main power has been switched
off on page 25.
© Copyright 2007-2018 ABB. All rights reserved.
Article number
3HAC14178-1
See Circuit diagrams on
page 249.
Product manual - IRC5 Panel Mounted Controller
Note
DSQC 609
The contents are defined in
section Standard toolkit.
These procedures include
references to the tools re-
quired.
Note/Illustration
3HAC047137-001 Revision: J